• Mathias Fredrixon and Michael Olberg at Chalmers

• Isabelle Ristorcelli, CESR, Toulouse

• Group photo of some Odin team members in July 1997

• Frederic Fournier, CESR, Toulouse

• Christophe Marty, CESR, Toulouse

• Magne Hagstrom, Odin Group Leader, Chalmers

• Magnus Dahlgren, Odin Group, Chalmers

• Petri Piironen, Helsinki University of Technology

• Antti Raisainen, Helsinki University of Technology

• Alain Lecacheux and Carlo Rosolen, Observatoire de Paris a Meudon

• Jacques Narbonne, CESR, Toulouse

• Roger Pons, CESR, Toulouse

• Steve Torchinsky at Chalmers

• Taavi Hirvonen, Helsinki University of Technology

• Mathias, Magnus, and Gunnar

• Vincent Clerc, Observatoire de Paris

• Steve Torchinsky, Odin Group, Chalmers (posted by Calgary)

• Gilbert Rouaix, CESR, Toulouse

• Dominique Pouliquen, LAS, Marseille

• Jean-Claude Berges, LAS, Marseille

• Jean-Claude Berges, LAS, Marseille

• Jean-Claude Berges, LAS, Marseille

• Taavi Hirvonen, Helsinki University of Technology

• Michel Nexon, CESR, Toulouse

• Magne during beam testing in Linkoping

• Steve in Linkoping

• Magne Hagstrom in Linkoping

• Urban Frisk

• Johan Lassing

Vibration and Solar Simulation at Intespace

• Hall View (2000-06-09)

• UppenbarligenDamernas (2000-06-10)

• Dueling Cameras (2000-06-10)

• Z-vibration1 (2000-06-14)

• Preparing for solar sim (2000-06-30)

• Odin mounted for solar sim (2000-07-05)

• Odin mounted for solar sim 2 (2000-07-05)

• Odin being raised into SIMLES (2000-07-10)

• SIMLES control room (2000-07-10)

• CNES-Meudon-visit

• Vibration qualification of Steve's computer

Telescope Beam Testing

• Michel Nexon, Guy Serra, and Christophe Marty

• View from above Odin

• The hologram is a large sheet of copper plated mylar with an etched pattern.

• View of the hologram as seen from Odin looking towards the source (2)

• View of the hologram as seen from Odin looking towards the source (1)

• A Gunn oscillator illuminates the hologram.

• View of Odin looking directly into one of the star trackers.

• A close-up of the star tracker

• 119GHz beam measurement using the HUT hologram

• Odin rotated 45 degrees during beam testing with the Helsinki University of Technology hologram

• Front view of Odin

• Heaters on the back of the main reflector are used to maintain a uniform temperature across the dish

• Odin mounted at 45 degrees in the Saab-Ericsson Space facility

• Odin was rotated 45 degrees to align the receiver polarisation with that of the hologram

• View of the hologram as seen from the source

• Packing for Linkoping

• Packing for Linkoping 2

• Packing for Linkoping 3

• Packing for Linkoping 4

• Radiometer before integration

• Magne Hagstrom in Linkoping

• Steve in Linkoping

• Odin suspended for cooler vibration test

• Fredrik Sjoberg under Odin in Linkoping

• Odin Science Team in Linkoping

The Odin Radiometer

• Overview of the radiometer platform

• The diplexer tower and optics platform

• Overview of the radiometer platform

• Computers in the Odin lab

• Radiometer Engineering Model

• Submillimetre mixers

• Lenses mounted in the front plate of the cold box

• Radiometer system test setup at Chalmers (view from above)

• Radiometer system test setup at Chalmers (long view)

• The beam measuring x-y track

• The optics bench with the radiometer sitting outside the vacuum box

• Side view of the Acousto-Optic Spectrometer

• Qualification Model AOS

• ColdBox inside backview

• ColdBox inside close-up of IF amps

• ColdBox insulation

• Displacer cable before modification

• Displacer cable before modification (close up)

• Local Oscillator

• LO with integrated harness

• LO with integrated harness

• Lens with linear matching grooves

• Magne setting up a beam test

• The cold box

• Calibration load and thermometers

• LO assembly

• Diplexer tower and cables

• LO and tuning mechanisms

• Calibration switch mirror

• Internal calibration load

• Flight Model AOS

 Odin EMC at Saab-Ericsson Space Facility

• Odin in launch configuration during EMC testing (folded)

• Odin Deployed

• Odin EMC test

Beam Testing in Toulouse

• The primary dish sitting in front of the collimater

• View of the subreflector

• Magne, Fredrik, and Steve working in Toulouse

• Magne Fredrik and Steve working in Toulouse

• Fredrik and Steve working in Toulouse

• Magne Fredrik and Steve working in Toulouse

• Setting up a beam measurement at Toulouse

• Beam measuring setup at CESR Toulouse